Server Error in ‘/’ Application.
Could not load file or assembly ‘AlexCrome.CS’ or one of its dependencies. There is not enough space on the disk. (Exception from HRESULT: 0x80070070)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileLoadException: Could not load file or assembly ‘AlexCrome.CS’ or one of its dependencies. There is not enough space on the disk. (Exception from HRESULT: 0x80070070)
| An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. |
Assembly Load Trace: The following information can be helpful to determine why the assembly ‘AlexCrome.CS’ could not be loaded.
WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
[FileLoadException: Could not load file or assembly 'AlexCrome.CS' or one of its dependencies. There is not enough space on the disk. (Exception from HRESULT: 0x80070070)] [FileLoadException: Could not load file or assembly 'AlexCrome.CS, Version=2.0.3384.38195, Culture=neutral, PublicKeyToken=null' or one of its dependencies. There is not enough space on the disk. (Exception from HRESULT: 0x80070070)] System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'AlexCrome.CS, Version=2.0.3384.38195, Culture=neutral, PublicKeyToken=null' or one of its dependencies. There is not enough space on the disk. (Exception from HRESULT: 0x80070070)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +11346184 System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +388 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +232 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +48 System.Web.Compilation.CompilationUtil.GetTypeFromAssemblies(AssemblyCollection assembliesCollection, String typeName, Boolean ignoreCase) +166 System.Web.Compilation.BuildManager.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +362 System.Web.Profile.ProfileBase.AddProfilePropertySettingsForCompilation(ProfilePropertySettingsCollection propertyCollection, Hashtable ht, String groupName) +563 System.Web.Profile.ProfileBase.GetPropertiesForCompilation() +353 System.Web.Compilation.ProfileBuildProvider.get_HasCompilableProfile() +74 System.Web.Compilation.ProfileBuildProvider.GetProfileTypeFromAssembly(Assembly assembly, Boolean isPrecompiledApp) +17 System.Web.Compilation.BuildManager.CompileCodeDirectory(VirtualPath virtualDir, CodeDirectoryType dirType, String assemblyName, StringSet excludedSubdirectories) +11335194 System.Web.Compilation.BuildManager.CompileCodeDirectories() +654 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +658 [HttpException (0x80004005): Could not load file or assembly 'AlexCrome.CS, Version=2.0.3384.38195, Culture=neutral, PublicKeyToken=null' or one of its dependencies. There is not enough space on the disk. (Exception from HRESULT: 0x80070070)] System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +76 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +1012 System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +1025 [HttpException (0x80004005): Could not load file or assembly 'AlexCrome.CS, Version=2.0.3384.38195, Culture=neutral, PublicKeyToken=null' or one of its dependencies. There is not enough space on the disk. (Exception from HRESULT: 0x80070070)] System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +11440198 System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88 System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +11313160
P0740 kia spectra ошибка
При диагностике Kia-spectra, АКПП, вылезла ошибка РО 740 Цепь управления блокировкой дифференциала не исправна. Какими последствиями может обернуться для коробки эта проблема?
| ‘denwerok’ *’443393′ *’14.7.2009, 12:27′]При диагностике Kia-spectra, АКПП, вылезла ошибка РО 740 Цепь управления блокировкой дифференциала не исправна. Какими последствиями может обернуться для коробки эта проблема? |
Денис, свою коляску поломал?
мануал на англ 2004 > 1.6L DOHC > AT > AUTOMATIC TRANSAXLE > P0740 Torque Converter Clutch Circuit/Open
Torque converter clutch system malfunction
Shift solenoids A, B, C, vehicle speed sensor, input/turbine speed sensor and transaxle fluid temperature sensor function normally. Vehicle speed is between 44 mph (71 km/h) and 65 mph (105 km/h) and difference in the number of engine revolutions and reverse and forward drum revolutions when in 4GR TCC operation is above 100 rpm.
1. Air leak between Throttle Position Sensor (TPS) and Mass Air Flow Sensor (MAFS).
4. Torque converter clutch slipping.
5. Torque converter control valve or torque converter relief valve stuck.
6. Torque converter clutch (TCC) solenoid valve malfunction.
If any codes relating to TPS or MAFS are present, do ALL repairs associated with those codes before
proceeding with troubleshooting for a P0740 code. A faulty TPS or MAFS can set a P0740.
Check for cracked intake tube, improperly installed intake tube or other source of air leak between TPS and MAFS.
Were any air leaks found between TPS and MAFS?
Check ATF level (transaxle at normal operating temperature).
Check for any signs of leakage from transaxle. Repair as necessary and fill transaxle to full level.
Check ATF condition and compare to following chart.
1. Clear reddish pink: Normal condition.
2. Dark or black (with friction material): Internal transaxle malfunction or excessive wear.
3. Milky pink: Water contamination.
4. Light to dark brown (oxidized): Overheated or worn out fluid.
Is fluid condition other than normal?
For ATF condition #2, replace transaxle.
For ATF condition #3, replace fluid, repair source of contamination and perform pressure tests. If water contamination is severe, replace transaxle.
For ATF condition #4, replace fluid and perform pressure tests.
Check line pressure and compare to the following chart.
Is line pressure within specification?
Check torque converter front chamber pressure as follows:
1. Remove front chamber access plug. NOTE: Front chamber pressure access plug is accessible through the front of the cut-out in the engine support cross member. It is the second 5 mm allen headed plug (counting from the bottom of the transaxle forward).
2. Screw pressure port adapter into front chamber port and attach adapter to 100 psi gauge.
3. Disconnect H-04 from transaxle and attach a 10 amp fused jumper wire to the #2 pin at the transaxle (make the jumper wire long enough to reach the battery positive post).
4. Raise vehicle on the lift so the tires are at least 5 inches off of the floor and apply hand brake.
5. Start engine and warm it up to operating temperature.
6. Shift transaxle into D and raise vehicle speed to approximately 40 to 50 mph.
7. While maintaining vehicle speed, touch loose end of jumper wire to battery positive post and observe front chamber pressure. Front chamber pressure will drop in 2 stages within 2 seconds with TCC energized.
TCC solenoid off — approximately 88 to 92 psi.
TCC solenoid on — approximately 30 to 38 psi.
Is the front chamber pressure within specification and does it drop as described within 2 seconds?
Remove transaxle drain pan and TCC solenoid from valve body. Attach a short piece of hose to TCC solenoid nipple. Blow through hose and verify air does not escape from hole in body of solenoid. Jumper a wire from solenoid body to battery negative and another wire from solenoid terminal to battery positive. Blow through hose and verify air escapes from hole in body of the solenoid. If TCC solenoid checks okay, replace valve body.
Clear codes and verify any repairs by driving vehicle with Hi-scan Pro connected to OBD-II connector
The torque converter can only be checked by the use of special equipment. If replacing valve body does not repair vehicle, replace transaxle.