Check exhaust system kia

Тема: Ошибка P2003 + Проверьте выхлопную систему

Ошибка P2003 + Проверьте выхлопную систему

Kia Sportage IV 1.6 CRDi awd 2018года, сборка Словакия, экология на месте, регенерация работает отлично

периодически загорается предупреждение «ПРОВЕРЬТЕ ВЫХЛОПНУЮ СИСТЕМУ» и авто перестаёт разгоняться, после остановки заглушил-завёл предупреждение пропадает и авто едет бодро, после трёх ошибок предупреждений загорается «CHECK ENGINE» ошибка P2003, но он на динамику никак не влияет

На диагностике у офицалов показывает 1,5гр сажи, других ошибок нет (кроме P2003)

Замена датчика давления выхлопных газов не помогла, в гугле кроме аналогичных проблем решения не нашёл

Кто-нибудь решал подобную проблему?

Спортиссимо ( 1190 ) Регистрация 31.10.2017 Город Рига, Латвия EX была 1.7 CRDi HP 7DCT был 2WD Сообщений 5,545

1,187 67

Сообщение от Алекс2023

Kia Sportage IV 1.6 CRDi awd 2018года, сборка Словения, экология на месте, регенерация работает отлично

периодически загорается предупреждение «ПРОВЕРЬТЕ ВЫХЛОПНУЮ СИСТЕМУ» и авто перестаёт разгоняться, после остановки заглушил-завёл предупреждение пропадает и авто едет бодро, после трёх ошибок предупреждений загорается «CHECK ENGINE» ошибка P2003, но он на динамику никак не влияет

На диагностике у офицалов показывает 1,5гр сажи, других ошибок нет (кроме P2003)

Замена датчика давления выхлопных газов не помогла, в гугле кроме аналогичных проблем решения не нашёл

Кто-нибудь решал подобную проблему?

Источник

Kia Telluride 2023 Be Sure The Exhaust System Does Not Leak, Before Driving and ENGINE START/STOP Button User Guide

Kia Telluride 2023 Be Sure The Exhaust System Does Not Leak, Before Driving and ENGINE START/STOP Button User Guide

Be sure the exhaust system does not leak

The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose.
If you hear a change in the sound of the exhaust or if you drive over something that strikes the underneath side of the vehicle, have the exhaust system checked as soon as possible by an authorized Kia dealer.

WARNING
Engine exhaust
Do not inhale exhaust fumes or leave your engine running in an enclosed area for a prolonged time. Exhaust fumes contain carbon monoxide, a colorless, odorless gas that can cause unconsciousness and death by asphyxiation.

1. Close all windows.
2. Open side vents.
3. Set the air intake control at “Fresh”, the air flow control at “Floor” or “Face” and the fan at the highest speed.

Before driving.

Before getting into the vehicle, you should examine the car and its surroundings. After getting into the vehicle, you should check a number of things before driving.
Before entering vehicle

• Be sure that all windows, outside mirror(s), and outside lights are clean.
• Check the condition of the tires.
• Check under the vehicle for any sign of leaks.
• Be sure there are no obstacles behind you if you intend to back up.

Necessary inspections
Fluid levels, such as engine oil, engine coolant, brake fluid, and washer fluid should be checked on a regular basis, at the exact interval depending on the fluid. Further details are provided in chapter 7, “Maintenance”.

WARNING
Distracted driving
Focus on the road while driving. The driver’s primary responsibility is in the safe and legal operation of the vehicle. Any use of handled, other equipment or vehicle systems that distract the driver should not be used during vehicle operation.

• Close and lock all doors.
• Position the seat so that all controls are easily reached.
• Buckle your seat belt.
• Adjust the inside and outside rearview mirrors.
• Be sure that all lights work.
• Check all gauges.
• Check the operation of warning lights ton is turned to the ON position.
• Release the parking brake and make sure the brake warning light is not on.
  For safe operation, be sure you are familiar with your vehicle and its equip-ment.

WARNING
Fire risk
When you intend to park or stop the vehicle with the engine on, be careful not to depress the accelerator pedal for a long period of time. It may overheat the engine or exhaust system and cause fire.

WARNING
Check surroundings
Always check the surrounding areas near your vehicle for people, especially children, before putting a vehicle into D (Drive) or R (Reverse).
WARNING
Loose objects
Securely store items in your vehicle. When you make a sudden stop or turn the steering wheel rapidly, loose objects may drop on the floor and it could interfere with the operation of the foot pedals, possibly causing an accident.

WARNING
Driving while intoxicated
Do not drive while intoxicated. Drinking and driving is dangerous. Even a small amount of alcohol will affect your reflexes, perceptions and judgment.
Driving while under the influence of drugs is as dangerous as or more dangerous than driving drunk.

WARNING
Proper footwear
Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots, sandals, etc.) may interfere with your ability to use the brake and accelerator pedals.

ENGINE START/STOP button

Illuminated ENGINE START/STOP button

The light will go off after about 30 seconds when the door is closed. It will also go off immediately when the theft-alarm system is armed.

ENGINE START/STOP button position

Your vehicle is equipped with four different ignition positions.
OFF
To turn off the engine (START/RUN position) or vehicle power (ON position), press the ENGINE START/STOP button with the shift lever in the P (Park) position. When you press the ENGINE START/STOP button without the shift lever in the P (Park) position, the ENGINE START/STOP button will not change to the OFF position but to the ACC position.

NOTICE
You are able to turn off the engine (START/RUN) or vehicle power (ON), only when the vehicle is not in motion.

CAUTION
In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times repeatedly within 3 seconds.
If the vehicle is still moving, to restart the vehicle:

ACC (Accessory)

Press the ENGINE START/STOP button while it is in the OFF position without engaging the brake pedal.
Some electrical accessories are operational.
If the ENGINE START/STOP button is in the ACC position for more than 1 hour, the button is turned off automatically to prevent battery discharge.
ON
Press the ENGINE START/STOP button while it is in the ACC position without depressing the brake pedal.
The warning lights can be checked before the engine is started. Do not leave the ENGINE START/STOP button in the ON position for a long time. The battery may discharge, because the engine is not running.

START/RUN
To start the engine, press the brake pedal and push the ENGINE START/STOP button with the shift lever in the P (Park) or the N (Neutral) position. For your safety, start the engine with the shift lever in the P (Park) position.

NOTICE
If you press the ENGINE START/STOP button without pressing the brake pedal, the engine will not start and the ENGINE START/STOP button changes as follow:
OFF → ACC → ON → OFF or ACC

• Never press the ENGINE START/STOP button while the vehicle is in motion. This would result in loss of directional control and braking function, which could cause an accident.
• Before leaving the driver’s seat, always make sure the shift lever is engaged in P (Park), set the parking brake fully and shut the engine off. Unexpected and sudden vehicle movement may occur if these precautions are not taken.
• Never reach for the ENGINE START/STOP button or any other controls through the steering wheel while the vehicle is in motion. The presence of your hand or arm in the area could cause loss of vehicle control, an accident and serious bodily injury or death.
• Do not place any movable objects around the driver’s seat as they may move while driving, interfere with the driver and lead to an accident.

Starting the engine

• Do not start the vehicle with the accelerator pedal engaged. The vehicle can move and lead to an accident.
• Wait until the engine rpm is normal.
  The vehicle may suddenly move if the brake pedal is released when the rpm is high.

Starting the engine

1. Make sure the smart key is located inside the vehicle and close to the driver’s seat. The vehicle may not start if it is not located near the driver seat.
2. Make sure the parking brake is applied.
3. Make sure the shift lever in P (Park
4. Press the brake pedal fully.
   You can also start the engine when the shift lever is in the N (Neutral) position.
5. Press the ENGINE START/STOP button.
   Make sure that the accelerator pedal is not pressed.
6. Do not wait for the engine to warm up while the vehicle remains stationary. Start driving at moderate engine speeds. (Steep accelerating and decelerating should be avoided.)

Starting the engine with smart key
At the time that the vehicle doors are opened or when the ENGINE START/STOP button is pressed the vehicle will check for the smart key.
If the smart key is not in the vehicle, the ” ” indicator and a message “Key is not in the vehicle” will appear on the instrument cluster and LCD window. And if all doors are closed, the chime will sound for 5 seconds. The indicator or warning will turn off while the vehicle is moving. Always have the smart key with you.

WARNING
The engine will start, only when the smart key is in the vehicle. Never allow children or any person who is unfamiliar with the vehicle touch the ENGINE START/STOP button or related parts. Pushing the ENGINE START/STOP but-ton while the smart key is in the vehicle may result in unintended engine activation and/or unintended vehicle move-ment.
CAUTION
If the engine stalls while the vehicle is in motion, do not attempt to move the shift lever to the P (Park) position. If the traffic and road conditions permit, you may put the shift lever in the N (Neutral) position while the vehicle is still moving and press the ENGINE START/STOP button in an attempt to restart the engine.

• If the battery is weak or the smart key does not work correctly, you can start the engine by pressing the ENGINE START/STOP button with the smart key.
  When you press the ENGINE START/STOP button directly with the smart key, the smart key should contact the button at a right angle.
• When the stop lamp fuse is blown, you cannot start the engine normally.
  Replace the fuse with a new one. If it is not possible, you can start the engine by pressing the ENGINE START/STOP button for 10 seconds while it is in the ACC position. The engine can start without pressing the brake pedal. But for your safety always press the brake pedal before starting the engine.

CAUTION
Do not press the ENGINE START/STOP button for more than 10 seconds except when the stop lamp fuse is blown.

Kia Telluride Top Accessories

[amalinkspro_table new-window=”on” nofollow=”on” addtocart=”off” /]

Источник